Quilting Tutorial: Cathedral Windows Part 2 – Making the Windows

This is the 2nd part of my Cathedral Windows Tutorial. See the previous post for Part 1. In this post, I’ve completed the background panels and now I’m going to add the print fabrics and make the windows.

Cut 3” squares from your chosen fabrics. I used a load of different Liberty fabric scraps so that all my windows would have a different fabric but they’d still go together.

Cathedral Windows Tutorial 16With a square wrong side up, hold two of the corners down with your thumb and index finger and press over the just the centre of the edge by approx. 1/4”. Be careful the hot iron doesn’t burn those fingers!

Cathedral Windows Tutorial 17Repeat with all the edges and then do the same with all your fabric squares.

Cathedral Windows Tutorial 18Place the fabric squares, right side up, on top of each diamond shape of the prepared background panel as shown. Here I’m adding them to a small single row panel. Later on you’ll see my larger panel version too. Pin them to secure in place.

Cathedral Windows Tutorial 19Fold each free edge of the background panel over each each of the square. A natural curve will be created due to the points of the background panel being stitched together (see previous post, Part 1). Pin through all the layers to hold firmly in place and ensure that the window is completely filled with the print fabric. Gently tuck the print fabric into the corners, if it’s not sitting right into them.

Cathedral Windows Tutorial 20Repeat the folding/pinning process to make all the windows. This is when it starts to get exciting as you see the gorgeous windows forming!

Cathedral Windows Tutorial 21I decided to go one step further and cut small petal shaped pieces of the print fabrics to fill the gaps now formed in each corner of my panel. Aren’t I the show off! The thing is, once you get started on this technique, you don’t really want to stop.

Cathedral Windows technique 22Now it’s time to topstitch along the edges of all the folded over edges. I decided to do double rows around each corner petal shape and single rows around all the diamond shaped windows. Put your machine on a longish stitch, as there’s lots of layers and the stitches also look better when they’re longer. Carefully stitch all the edges, removing each pin as you get to it. When you get to the edge of each fold just continue stitching over to the next one, so you don’t have to continually keep stopping and starting and new line of stitch. Just try to keep the stitching as neat as you can, as you work your way around each one.

Cathedral Windows technique

Cathedral Windows technique 2

Cathedral Windows Tutorial Part 1

Now to decide what I’m going to use these panels for. I think they’ll be great made up into cushions with co-ordinating panels. What do you think? Have you made Cathedral Windows before or will you be having a go at making them for the first time?

Advertisements

Quilting Tutorial: Cathedral Windows Part 1 – Preparing the Background Squares

I’ve long admired the Cathedral Windows quilting technique and was determined to learn how to do it. Well, at last, I’ve done it and I loved the result so much that I’m eager to share the technique here with you. If this is something you haven’t tried yet, I definitely recommend you do. It’s one of those techniques that appears really hard to do but, once you get to grips with it, it’s really not as difficult as it looks. Yes, it is time-consuming but it’s so rewarding.

Cathedral Windows Tutorial Part 1

Sneak peek of a Cathedral Windows panel I’ve made.

I used a cream background fabric with scraps of Liberty prints for the windows, which I just knew would make for a stunning effect (if I could complete it anyway!!). As you can see above, I did complete it and loved every minute of making it. So on with how to do it. There’s a lot of pictures but I felt this technique warrants lots of how-to images.

CATHEDRAL WINDOWS: PART 1

Cathedral Windows Tutorial 1These are the Liberty fabric scraps and plain background fabric I used, along with some prepared squares I did earlier.

To prepare the fabric squares: cut the plain fabric into accurate squares measuring, 10” x 10”. Then cut a piece of thick paper, measuring 9” x 9” – this will be used as a guide, see below, to fold over the raw edges by 1/2”.

Cathedral Windows Tutorial 2Place the paper template onto the wrong side of a fabric square, leaving equal 1/2” gaps at all the edges. Fold over and press each edge of the fabric as shown.

Cathedral Windows Tutorial 2Remove the paper template and fold the square in half, matching up the folded edges, press. Open up and fold in half again, the other way, press. Open back out.

Cathedral Windows Tutorial 4Fold one of the corners to the centre point, press.

Cathedral Windows Tutorial 5Fold the remaining corners into the centre and press. Try to do this as neatly and accurately as possible, ensuring that the folds butt up to each other and don’t overlap. Take your time, you’ll get quicker with a bit of practice.

SAMSUNG CSCRepeat the folding process, folding one corner to the centre point and pressing.

 Cathedral Windows Tutorial 7

Fold and press the remaining corners to the centre point, press. Pin through the layers to hold securely. Fold and press more squares in the same way.

Cathedral Windows Tutorial 8Place two of the squares side by side and unpin the flaps next to each other. Pin them together.

Cathedral Windows Tutorial 9Sew the flaps, along the crease marks, ensuring they’re aligned neatly.

Cathedral Windows Tutorial 10Open back out and unpin the sewn together flaps. Stitch another square onto the panel, in the same manner. Add more squares if you want the row to be longer.

Cathedral Windows Tutorial 11Press the sewn together flaps flat again. Make more rows of squares in the same manner.

Cathedral Windows Tutorial 12To make bigger panels, join two rows of squares together: place side by side, unpin the adjacent flaps and pin together.

Cathedral Windows Tutorial 13Ensuring they are aligned, stitch along the crease mark of the pinned together flaps.

Cathedral Windows Tutorial 14Unpin the sewn together flaps and press them flat again. Add more rows together in the same way, if you want bigger panels.

Cathedral Windows Tutorial 15Hand-stitch together, all four points at the centre of a square, so they stay securely joined at the points only. Repeat with every square. Do the stitches small and as neat as possible. Once you stitched the points together, you can remove all the pins from the panels.

That’s the background panels now completed. I just made one small panel with three squares joined together and another panel with six squares joined together. You can make your panels as big as you want. I just wanted to start off small whilst learning this new technique.

See the next post CATHEDRAL WINDOWS PART 2 for how to add the prints and make the windows.